" "

Saferinternet Connection Wizard Instructions for Windows NT


For the following instructions you must be logged on to Windows NT as "Administrator"

Go to "My Computer" and click on "Dial-up Networking".
The Following screen appears:

Pick "Yes" and this screen appears:

 

Depending on your modem you may need to pick your modem from a list rather than having Windows NT
detect it, Generally this is a "Standard 28.8K" modem.
Note: It is generally a good idea to pick your modem from a list if you know the manufacturer over
letting NT detect for it. Incorrect detections have been known to be much more common than in Win95.

Once you have completed the above steps this screen appears to confirm that your modem is installed properly.

Pick "OK" on this screen.

Then pick Network... from this menu.

Check off ONLY "TCP/IP" and click "OK"

Then click on Configure... and select the amount of security you wish to assign to your modem.
at a minimum you must have "Dial out only"

Click "Restart" to finish the configuration.

Go to "My Computer", "Dial-up Networking" and this screen is shown.

Have your screen match the following screen and press "Finish"

Now click each of the upper tabs and have each screen match the respective
Tab shown in the images below. Then click on "TCP/IP Settings"
This is very important this screen match exactly as below

Fill out the next screen according to the graphic below.
This is very important this screen match exactly as below:
Our DNS servers are:

Primary 207.232.18.3
Secondary 207.232.25.3

This is very important this screen match exactly as below

This is very important this screen match exactly as below

Now click on "More"

 

Be sure to us a dial-up number that is local for you. Leave the area code blank.
Coshocton:             623-8930
West Lafayette 623-8930
Newcomerstown:   545-5090
Newark:                334-4055
Zanesville:              455-2279

 

 

 

 

 

 

 

 

 

 

 

and set your logon preferences in the dialing screen to your likings,
you should set the redial to 99 and the idle seconds to 0

Then click on "OK"

The next time you click on dial you will be shown the following screen.
Fill it out as shown below (changing the login name to yours). Be Sure That The "Domain" field is BLANK

After you click on "OK" the computer will dial, and you will get a connected message, after this you are free to navigate the net.

 

 

" "